RedPort Optimizer Advanced wXa-203 Advanced User'S Manual Download Page 49

Page: 49 / 85

wXa-203, wXa-213, wXa-223

Optimizer

v2.2.1

Disabling this Remote Support will not disable the one-time Remote Support. To disable
remote support access:

•

Click <Services> tab, then click “Enable Remote Access”.

Status

Available to both ‘admin’ and ‘superadmin’ login.

Use the Status tab to display current information of the router’s performance.

Some of the information provided here includes:

•

How much memory the router is currently using

•

Who is currently connected via Wi-Fi

•

Error messages reported in the System Log and can be useful when
troubleshooting connection issues.

•

Realtime Graphs report how much data is being used by the different interfaces.

All Status information is READ ONLY

Summary of Contents for Optimizer Advanced wXa-203





















































































Search results

Summary of Contents for Optimizer Advanced wXa-203

Reviews:

Related manuals for Optimizer Advanced wXa-203

Brands by name

Popular brands

RedPort Optimizer Advanced wXa-203, Advanced User'S Manual

Search results

Summary of Contents for Optimizer Advanced wXa-203

Reviews:

Related manuals for Optimizer Advanced wXa-203

Brands by name

Popular brands