7
Effective 08 2021
Drawing No. LP1140
INSERTION/REMOVAL OF THE microSD CARD
The microSD Card can be used to flash new firmware on
PM-50 by placing an image file on the formatted microSD card. It
can also be used to import previous configuration through
import/export configuration menu. The card is then inserted into
the PM-50 slot located next to the terminals on the bottom side
of the unit. Refer to the User manual for more information on the
proper names and locations of the files.
After inserting the microSD card into the unit, navigate to the
Device/Misc. Configuration/Firmware Upload screen on the
PM-50 to upload the latest firmware version.
MicroSD Card
Orientation
4.3 Inch Meter
MicroSD Card
Orientation
3.5 Inch Meter
ORDERING INFORMATION
DESCRIPTION
PART NUMBER
Graphical Panel Meter, 4.3" Display, Digital Input
PM500D0400800F00
Graphical Panel Meter, 3.5" Display, Digital Input
PM500D0301600F00
Accessories
TYPE
DESCRIPTION
PART NUMBER
Modules
RS232 Serial Communications Module
PMM000CM23200000
Ethernet Communications Module
PMM000CMENT00000
Analog Output Module
PMM000I0AN000000
Dual Setpoint Relay Output Module
PMM000I0RL200000
Quad Setpoint Relay Output Module
PMM000I0RL400000
AC to DC Power Module
PMM000PWACP00000
Misc.
Replacement Rear Cover/Bus Board with Spacer Module (4.3" model only) PMA000CP00800000
Conversion Panel 92 mm x 75 mm to 1/8 DIN
PMA000MK00800000
Conversion Panel 68 mm x 68 mm to 1/16 DIN
PMA000MK01600000
Replacement Module Lock Pins
PMA000MKLP00000
4.3" Protective Screen Overlay
PMA000SP00800000
3.5" Protective Screen Overlay
PMA000SP01600000
MicroSD Card
SD032G00
