AN-30 System User Manual
2 CRC4
3 FAS
4 unframed
lbo, params: SN, LBO_IND
Defines the LBO parameter of the current serial interface on T1/E1 module.
This command has effect only on T1 modules.
LBO_IND Definition
0 0dB
1 -7.5dB
2 -15dB
3 -22.5dB
Show operations
The
show
operation is:
•
tdm showserial
tdm showserial, params: SN, CFG
This command is used to get the serial interface parameters pointed by SN from running
or startup config.
If the CFG parameter is not specified the running config is selected by default.
CFG Definition
0 running
config
1 startup
config
9.8.
DS0 Bundle configuration commands
A DS0 bundle is a logical mapping of a number of timeslots from the same physical
T1/E1 port.
The starting timeslot selected (
ts_begin
) is:
ts_begin
= 0 if the line is unframed. In this case the number of selected ts must be 32 for
E1 or 24+1 for T1.
1<=
ts_begin
<=31(24 for T1) and
tsnumber
<=32-
ts_begin
(<=24+1-
ts_begin
for T1)
for framed. In this case the number of selected ts must be less than or equal to 31-
ts_begin
(24 -
ts_begin
for T1). If multiple DS0 bundles are defined for the same line,
they must not overlap. So valid value will be:
for E1
ts_begin
=1,
ts_num
=31
for T1
ts_begin
=1,
ts_num
=24
Page 53 of 80
Redline Communications
…..solving the first mile challenge