Redlake MASD 1.4i, User Manual

Page: 3 / 38

Mega Plus
®
Model 1.4i
PRECAUTIONS
WARNING!
LIFE SUPPORT APPLICATIONS POLICY
Mega Plus cameras are not authorized for and should not be used within life support
systems without the specific written consent of Redlake MASD, Inc.
NON-CRITICAL MEDICAL APPLICATIONS
Mega Plus cameras must be grounded to building earth ground while operating. This
camera has passed IEC 601 class B standards.
The voltage drop on the camera’s power return line must be less than 0.5 Volts DC.
Use a heavier gauge power cable to reduce the voltage drop below 0.5 Volts DC. For
medical applications, any power supply connected to the camera must meet IEC 601
specifications.
CAUTION:
A laser beam focused on the sensor, either directly or by reflection, can cause
permanent damage to the sensor. Any laser powerful enough to produce
localized heating at the surface of the sensor will cause damage, even if the
camera power is off. A sensor damaged by laser light is NOT covered by the
warranty.
OPERATING TEMPERATURE
The Mega Plus camera is designed to operate satisfactorily in an environment where the ambient
temperature is between 0° and 35°C (32° and 95°F), with no water condensation present.
STORAGE TEMPERATURE
Do not store the equipment in an area where the temperature will drop below –25°C (-13°F) or
exceed 80°C (176°F). Do not allow moisture to condense on the system.
SHIPPING
When shipping, use a carton that protects the camera from shock and moisture, similar to the
carton in which the unit was originally delivered. Do not ship the equipment in a cargo area
where the temperature will drop below -25°C (-13°F) or exceed 80°C (176°F). Do not allow
moisture to condense on the system.
91000050-002 Revision A iii USER’S MANUAL