Redlake MASD 1.4i, User Manual

Page: 15 / 38

Mega Plus
®
Model 1.4i
2.5 Routine Maintenance
There are no user serviceable parts in the camera. Should the shutter malfunction, the camera
must be returned to the factory for repair.
The lens should be cleaned according to good photographic practices. This will help keep your
camera producing top quality pictures.
The camera can be ordered from the factory with an infrared filter installed in the lens mount. If an
infrared filter was not ordered originally, a piece of clear glass will be installed in place of the filter.
The filter or its glass replacement keep the interior of the camera sealed from dust and should
never be removed in other than a clean room environment. Because of the high resolution of the
camera, a single speck of dust on the sensor is very noticeable.
If you need to use different filters in your application from time to time, we recommend that you
order the camera with the clear glass installed. The spectral sensitivity can then be changed by
exchanging filters on the end of the lens as in 35mm photography.
91000050-002 Revision A 2-5 USER’S MANUAL