9
3.0 FIRST INSTALLATION
Fig. 6
The machine is delivered on a pallet in transport position. To take the machine off the pallet and
place it horizontally, act as follows:
(Fig. 6)
.
!! NEVER CRAWL UNDER THE MACHINE !!
1.
Attach a cable to the lifting points on both sides of the machine, and to the top of the 3-
point hitch on the front.
2.
Lift the machine about 50 mm (2”) off the ground.
3.
Remove the pallet by removing the bottom 3-point pins (1) and (2).
4.
Pull the pallet from under the machine.
5.
Slowly rotate the machine horizontally.
6.
Lower the machine in a controlled and slow fashion until it is fully on the ground.
Make sure the cable/crane/lift has the capacity to lift at least 500 kg (1000 lbs).
