4
Check the Speed-Clean for loose bolts/ nuts/ parts every time before using it.
If present, check the hydraulic hoses regularly and replace them if they are damaged
or show signs of ageing. The replacement hoses should comply with the technical
demands of the manufacturer.
If present, before work is done to it, the pressure should
always
be taken off the
hydraulic installation.
In the absence of protective covers and safety stickers the Speed-Clean must
NEVER
be used.
NEVER
crawl under the Speed-Clean.
Turn the Speed-Clean over if necessary.
When performing maintenance, adjustments or repairs it is necessary to block the
Speed-Clean from sagging/moving/sliding away.
When performing maintenance, adjustments or repairs
always turn off the tractor’s
engine and remove the tractor’s key from the ignition.
(Fig.2)
Fig. 2
For maintenance and repairs only use original Speed-Clean parts for safety of
machine and operator.
Repairs of the Speed-Clean may only be performed by authorised technical
personnel.
Keep an account of repairs.
(5)
Besides the instructions in this user’s manual, the generally safety and instructions
should be followed.
When using the public highway the applicable traffic regulations also apply.
Transporting people is not permitted!
Do not use the Speed-Clean in the darkness, during heavy rainfall/ storms or on
slopes with an angle over 20 degrees.
