18
12.2 CHANGING OF THE VIBRATION SIEVE
Fig. 12
For operation with different materials there are sieves available with different meshes which
can be exchanged in the Speed-Clean.
Changing the vibration sieve is done as follows
(See Fig. 11)
:
!! Make sure the Speed-Clean is blocked properly and cannot move on its own !!
1. Take the vibration sieve/dirt receiving bin from the machine as described in chapter 10.0
2. Unscrew bolts (1) one turn.
3. Rotate lock plate (5) so that the sieve is free.
4. Unscrew bolts (2) one turn.
5. Move plates (3) upwards.
6. Remove the sieve (4) from the machine and place a new one.
7. Lower plates (3) and make sure the sieve is locked.
8. Tighten bolts (2).
9. Rotate lock plate (5) so that the sieve is locked.
10. Tighten bolts (1).
11. Place the vibration sieve/dirt receiving bin back in the machine as described in
chapter 10.0.
