DS3800
- 3 -
SAFETY REGULATIONS
The
DS3800 RINK disc spreader
is built exclusively for spreading fine-grained, loose grit
such as sand, trickle, granules or the like.
Any other use shall be deemed improper use. The manufacturer shall not be liable for
any damage resulting. The user alone bears the risk.
Proper use also includes compliance with the operating, maintenance and service
conditions prescribed by the manufacturer.
The
DS3800 RINK disc spreader
is state-of-the-art and reliable; however, the
RINK
DS3800 disk spreader
may
pose a
risk to life and limb of the user and strangers unless
used, maintained or repaired by persons familiar with and aware of the dangers.
Every person who is responsible for the operation, maintenance and repair of the
spreader must have read and understood the operating instructions and in particular the
chapter on
safety regulations.
For repairs only use
original spare
parts from
the manufacturer
.
In addition to the instructions in this operating manual, the general
safety and accident
prevention regulations
must be observed.
When using public roads, the respective provisions (StVZO) apply.
The spreader may only be carried on public roads if registered to do so. TÜV's full report
and necessary additional safety devices (lighting, wheel chocks)# are available on
request.
Giving other people a ride is not allowed!
Climbing onto the loading bridge is prohibited while the spreader is in use
. A note
is attached to the wheel cover on both sides of the
DS3800 RINK disc spreader
. This
note must always be easy to read and must be replaced if damaged.
The user
must
inspect the
RINK
disc spreader DS3800
for
visible damage and
defects before use
. Modifications to the
DS3800 RINK disc spreader
(including
operation), that may negatively affect safety, must be eliminated immediately. For safety
reasons, no modifications to the
DS3800 RINK
disc spreader
(with the exception of
modifications/additions approved by the manufacturer) may be made to the machine. If
modifications are made to the
DS3800 RINK disc spreader
, the current CE of the
machine will become
invalid
and must be renewed by the person who made these
modifications.
