Redexim OVERSEEDER 3D 1275, User Manual And Parts Book, Page: 11 / 23

11
5. Mount the top rod (4) onto the tractor and attach it to the machine using the 3-point pin
(1) . Lock the pin using the R-clip.
6. Start the tractor and lift the machine off the ground.
!! Make sure that the 3-point pins are locked using the R-clips !!
7. Turn off the machine and rotate the support legs (5) upwards onto the machine.
!! Make sure that the tractor cannot move !!
8. Start the tractor and drive to the field that should be treated.
9. While driving, carefully lower the machine into the ground.
10. Turn off the tractor and secure the tractor / Overseeder 3D combination against
driving off and/or sliding off.
11. Adjust the top rod in such a manner that the machine is horizontal.
6.2 Detaching the machine
The machine should be detached in the following manner ( see Figure 3 ):
1. Place the tractor and the lifted machine on a flat surface.
!! Make sure that the machine and the tractor cannot move while you are detaching
them !!
!! Switch off the tractor engine before detaching the machine !!
2.
Turn off the machine and rotate the machine’s support legs
(5) downwards.
3. Start the tractor and carefully put the machine onto the ground.
4. Turn off the machine, detach the top rod
(4) and remove it.
5. Loosen the lowest arms (2) .
!! The ground must be flat !!
6. Start the tractor and drive off.