26 | Care and Maintenance
Spare Parts
Periodically replace serviceable parts of the PowerDock to ensure it continues to operate optimally.
Visit the REDARC website for the full range of spare parts available for the PowerDock.
POWERDOCK TERMINAL ASSEMBLY KIT (PPSDOCKKIT-002)
The PowerDock Terminal Assembly may require periodic replacement to keep your PowerDock
operating optimally and safely. The Terminal Assembly should be replaced:
Immediately, if there is any sign of damage such as worn or bent contact blades, damaged
plastic housings etc.
Immediately, If excessive heat is felt after charging, or;
After approximately 4 years of normal use.
PPSDOCKKIT-002 — PowerDock Terminal Assembly Kit
ANTI-VIBRATION BUSHES, PIVOTS AND FEET
The Dock may be subjected to high levels of vibration if installed in a vehicle that has travelled
frequently on uneven roads, so inspect the condition of these parts and replace as needed.
The following parts should be replaced if they become worn or damaged.
PowerDock Side-Stop Bushes (BUSH5 — identical pair)
PowerDock Rollers (BUSH6 — identical pair)
PowerDock Dock Pivot Bushes (BUSH7 — identical pair)
PowerDock Dock End-Stops (BUSH8/9 — mirrored pair)
PowerDock Round Anti-vibration Feet (FEET5 — identical pair)
BUSH8/9
BUSH6
BUSH7
BUSH5
FEET5
