RED PT500-2, Service Manual

Page: 11 / 62

PT500-2 Service Manual
11
Install external speaker/MIC
Open the cover of the jack for external speaker/MIC, and then insert the plug of the
external speaker or microphone into the jack on the radio. When inserting the accessory
plug, make sure it is properly aligned ( straight) to avoid internal damage to the connector
in the radio.
Installing/Removing the Belt Clip
Use the 2 screws (M2.5x8.0) supplied with the radio and fix these screws on the holes in the
radio clip and into the holes in the aluminum case. If you want to remove the clip from the
radio, just unscrew them, and remove the clip, you can put the screws back to make sure
you do not loose them.