17
18
#8-32x3/8” screw
4mm
lock washer
Control knob
Side burner
bezel
First, remove the two screws and lock washers factory attached to the sideburner valve bracket.
Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two
#8-32x3/8”
screws and
4mm
lock washers. Press sideburner control knob onto valve stem.
Sideburner
valve bracket
Sideburner
fascia
Valve stem
Screws and Washers
removed from valve bracket
Note: Use left and right
holes on fascia to
attach valve bracket
holes on fascia to
attach bezel
Note: Use upper and lower
Note: Make sure set the bezel with
longer slot at the top
26
Attach rear of left side shelf using one
1/4-20x1½”
screw,
7mm
lock washer and
7mm
flat washer in lower hole, using one
Attach three
1/4-20x1/2”
screws,
7mm
lock washers,
7mm
flat washers at the front of shelf, shown
B
.
1/4-20x1/2”
screw,
7mm
lock washer and
7mm
flat washer in upper hole, shown
A.
7mm Flat Washer
7mm Lock Washer
1/4-20x1-1/2” Screw
7mm Flat Washer
7mm Lock Washer
1/4-20x1/2” Screw
A
B
1/4-20x1/2”
7mm Lock
Screw
Washer
7mm Flat
Washer
