background image

 

4

SAFETY INFORMATION                                                                                                       

14. 

Keep the appliance area clear and free from combustible materials, gasoline and 
other flammable vapors and liquids. 

15. 

Do not obstruct the flow of combustion and ventilation air. 

16. 

Keep the ventilation opening(s) of the cylinder enclosure free and clear from 

debris. Use this appliance in a well-ventilated space only. Do not use it in a 

building, garage, or any other enclosed area. 

Use this appliance in outdoor areas described below: 

(a) With walls on all sides, but at least one permanent opening at ground level and 

no overhead cover. 

(b) Within a partial enclosure that includes overhead cover and no more than two 

walls. These walls may be parallel, or at right angles to each other. 

(c) Within a partial enclosure that includes overhead cover and no more than two 

walls. The following shall apply: 

(i) 

One wall that is equivalent to at least 25% of the total wall area is 

completely open. 

(ii) 

30% or more in total of the remaining wall area is open and 

unrestricted. 

17. 

The LP-gas supply cylinder to be used must be: 

(a) Constructed and marked in accordance with the Specifications for LP-gas 

cylinders of the U.S. Department of Transportation of Dangerous Goods and 

Commission, CAN/CSA-B339, as applicable; 

(b) Provided with a listed overfilling prevention device; and 

(c) Provided with a cylinder connection device compatible with the connection for 

the appliance. 

18. 

Disconnect the cylinder when the appliance is not in use. 

19. 

Storage of an appliance indoors is permissible only if the cylinder is disconnected 

and removed from the appliance. 

20. 

Store the cylinder outdoors in a well-ventilated area (not in a building, garage, or 

other enclosed area) out of the reach of children. 

21. 

The cylinder used must include a collar to protect the cylinder valve. 

22. 

Do not store a spare LP-gas cylinder under or near this appliance; 

23. 

Never fill the cylinder beyond 80 percent full; 

24. 

Place the dust cap tightly on the cylinder valve outlet whenever the cylinder is not 

in use. Install only the type of dust cap on the cylinder valve that is provided with 

the cylinder valve. Other types of caps or plugs may result in a propane leak. 

25

.

 

Inspect the visible portion of the hose before each use of the appliance.   

26

. More frequent cleaning may be required as necessary. It is imperative that the 

Summary of Contents for PG139HC



















Reviews: