14
Fig. 13
Installing LP Gas Tank
Installing LP Gas Tank
13. If the heater is installed on a surface with
a gradient more than 15°, fix the base to
the surface by using two ground screws
through the two holes on base as
indicated. (Fig. 13)
1. Specific size and capacity for gas tank:
To operate you will need precision-filled standard
cylinder with specific size and capacity as shown.
9
KGS
20 lb
12.2 in / 31 cm
17.9 in / 45.5 cm
2. Connect 20 lb. LP Gas Tank
Before connecting, be sure that there is no
debris caught in the head of the LP gas tank
head of the regulator valve or in the head of
the burner and burner ports.
Line up threads on fitting with those on
regulator and rotate clockwise until
tight
. HAND
TIGHTENS ONLY. DO NOT USE ANY HAND TOOLS
TO MAKE THIS CONNECTION. Be careful not to
cross threads when screwing in FITTING
