15
.
SAFETY CHECK
Fig.14
Fig.15
Checking for Leaks
Your patio heater has been checked at all
factory connections for leakage. To check the
connection at the gas hose/regulator/cylinder:
a. Make leakage solution by mixing 1 part
liquid dish soap and 3 part water.
b. Spoon or brush several drops (or use a
squirt bottle) of the solution onto the gas
hose/regulator, regulator/cylinder and hose
connection.
c. Turn on gas cylinder valve. Inspect the
connections and look for bubbles.
d. If no bubbles appear, the connection is safe.
e. If bubbles appear, there is leakage. Loosen
and re-tighten this connection. If it still
leaks, please call customer service at:
1-888-376-9601.
3. Disconnect 20 lb. LP Gas Tank
Before disconnecting make sure the LP
gas tank valve is “OFF”.
Disconnect gas line to tank by turning
knob counterclockwise until it is loose.
Store the LP gas tank in a proper location
.
