How to test the torque
Test method 1: Static measurement, either on a test joint or actual application. Measure the move on torque with a torque wrench.
Test method 2: dynamic measurement with a rotary torque transducer on a test joint.
Test method 3: dynamic measurement with a rotary torque transducer on the actual application.
LED indicator and beeper on the tool shows the following status:
Status of the LED indicator and beeper
Status of the tool
Action to be taken
Light up in red, yellow and green together for one
scond.
A long beep for one second.
The motor is switched on
-
Light up in red for one second.
A long beep for one second.
The preset torque is not reached (NOK).
The screwing fastener must be performed again.
