RESET TOTAL **
If the totalizer/linearizer option is installed, this selects whether the total can
be reset from the front panel.
“rSttOt” < > “yES” or “NO”
RE-ZERO INPUT **
If the totalizer/linearizer option is installed, this selects whether the signal can
be re-zeroed
(tared)
or not.
“tArE” < > “yES” or “NO”
Note: The tare buffer can be cleared by “walking” through “Pro 2", using the P
button.
Depending on functions selected under Pro 3 and Pro 6, alarms, hysteresis,
peak, and valley values can be monitored and/or changed when PGM. DIS. is tied
to COMM. This provides a
“QUICK PROGRAMMING”
method for
“day to
day”
process changes.
(See QUICK PROGRAMMING SECTION for more
details.)
* This sequence may be subject to being locked out due to other programmed
sequences.
** This function operates independent of the state of the “PGM.DIS.” pin.
-11-