Classe BS2 v1.0
15
9.1.3 Slave Mode
With this function, you can define the device as slave.
1
．
Access the main menu.
2
．
Tap the <Up/Down>button until
“
Slave Mode
”
is displayed.
3
．
Press ENTER, the display will show
“
Slave Mode
”
.
4
．
Tap the <Up/Down>button
，
the display will show “Slave1”, ”Slave2”, ”Slave3”.
5
．
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.1.4 Auto Program
With this function, you can run the internal program. You can select the desired program under
“Select program”
. You can set the number of steps under
“Edit program”
. You can edit the
individual scenes under
“Edit scenes”
. With this function, you can run the individual scenes either
automatically, i.e. with the adjusted Step-Time.
1
．
Access the main menu.
2
．
Tap the <Up/Down>button until
“
Auto Program
”
is displayed.
3
．
Press ENTER, the display will show
“
Auto Program
”
.
4
．
Tap the <Up/Down>button
，
the display will show “Master1”, ” Alone”.
5
．
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
9.1.5 Sound Control
With this function, you can run the internal program sound-controlled.
1
．
Access the main menu.
2
．
Tap the <Up/Down>button until
“
Sound Control
”
is displayed.
3
．
Press <ENTER>, the display will show
“
Sound Control
”
.
4
．
Tap the <Up/Down>button
，
the display will show “Master”, ” Alone”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.2 Information
9.2.1 Time information
Current Time
With this function, you can display the temporary running time of the device from the last
power on. The display shows “XXXX”, “XXXX” stands for the number of hours. The
counter is resetted after turning the device off.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Information
”
is displayed. Press ENTER, the display will show
“
Information
”
. Tap the
<Up/Down>button until the display will show
“
Time Information
”
. Press ENTER, the
display will show
“
Time Information
”
.
2
．
Press <Up/Down>, the display will show
“
Current Time
”
.
3
．
Press< ENTER>, the display will show
“
Current Time
”
.
4
．
The display will show
“
XXXX
”
(Hours)
；
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Total Run Time
With this function, you can display the running time of the device. The display shows
“XXXX”, “XXXX” stands for the number of hours.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until
“
Information
”
is displayed. Press ENTER, the display will show
“
Information
”
. Tap the
<Up/Down>button until the display will show
“
Time Information
”
.
Summary of Contents for Classe BS 2
Page 1: ......
