VMS-333 & VMS-Mobile User Guide
Version 1.0
48
Copyright © Red Hen Systems
7.13 Configure VMS-333 parameters
Using VMS-Mobile, you can specify values for various parameters that control the VMS-333 and the
camera.
1.
From the VMS-Mobile home screen, click
Configure > Parameters
and the Configure VMS-333
Parameters screen appears.
2.
Fill in the following fields of information.
a.
AUX Port Baud Rate
. Click this button for a
new screen with a list of rates. Select one:
4800
(default),
9600
, or
115200
.
b.
Intervalometry Mode
. Click this button for a
new screen with a list of modes that
determine how photos will automatically be
taken:
Time
,
Distance
, or
Field-of-View
. Once
you select a mode, additional fields are
available for you to fill in. For more details,
see
Section 7.11 Set intervalometry
parameters
c.
Focus Time.
Enter the time (in
ms
) it takes to focus the camera (signal time). This is equivalent
to how long the shutter button is "half pressed."
d.
Shutter Time.
How the time (in
ms
) it takes to shutter the camera (signal time). This refers to
how long the shutter button is "full pressed." It generally has no effect on picture taking unless
the camera is in "bulb" mode—set to take multiple images as long as the shutter button is held
down
3.
If you want the values to return to their defaults, click the
Reset All Parameters
button at the
bottom of the screen.
4.
Click the
Back
button at the button of the screen to save your choices and return to the Configure
screen.
7.14 Configure VMS-333 buttons
You can specify how you want physical button pushes on the VMS-333 or camera to be handled.
For details, see
Control the way the thumb-trigger and VMS-333 trigger behave
.