Red Hat NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT, Reference Manual

Page: 97 / 268

Systems
85
Tip
If a guest system has not registered to the Satellite, this information appears as plain
text in the table.
If you have System Group Administrator responsibilities assigned for your guest systems, it is possible
that a user could see the message
You do not have permission to access this system
within the
table. This is because it is possible to assign virtual guests on a single host to multiple System Group
Administrators. Only users that have System Group Administrator privileges on the host system may
create new virtual guests.
6.4.2.9.5.2. System Details � Monitoring —
This tab is only visible for systems registered to a RHN Satellite Server with Monitoring enabled
and that are Monitoring entitled. It displays all of the probes monitoring the system. The
State
column shows icons representing the status of each probe. Refer to
Section 6.10, “Monitoring —
”
for descriptions of these states. Clicking the
Probe Description
takes you to its
Current State
page.
The
Status String
column displays the last message received from the probe.
To add a probe to the system, click the
create new probe
link at the top-right corner of the page and
complete the fields on the following page. Refer to
Section 7.5.1, “Managing Probes”
for detailed
instructions.
Once the probe has been added, you must reconfigure your Monitoring
infrastructure to recognize it. Refer to
Section 6.10.4, “Scout Config Push —
”
for details. After the probe has run, its results become available on
the
Current State
page. Refer to
Section 6.10.1.7, “Current State —
”
for details.
To remove a probe from a system, click on the name of the probe, then click the
delete probe
link in
the upper right corner. Finally, click the
Delete Probe
button to complete the process.
6.4.2.9.5.3. System Details � Groups —
This tab and its subtabs allow you to manage the system's group memberships.
6.4.2.9.5.3.1. System Details � Groups � List/Leave —
This subtab lists groups to which the system belongs and enables you to cancel those
associations. Only System Group Administrators and Satellite Administrators can