Red Hat NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT, Reference Manual

Page: 120 / 268

Chapter 6. Red Hat Network Website
108
6.4.9.3.7. System Details � Partitioning —
From this sub-tab, you can indicate the partitions that you wish to be created during installation. For
example:
partition /boot --fstype=ext3 --size=200
partition swap --size=2000
partition pv.01 --size=1000 --grow
volgroup myvg pv.01 logvol / --vgname=myvg --name=rootvol --size=1000 --
grow
6.4.9.3.8. System Details � File Preservation —
If you have previously created a file preservation list, you may include that list as part
of the kickstart. This will prevent the files in that list from being over-written during
the installation process. Refer to
Section 6.4.9.7, “Kickstart � File Preservation —
”
for information on how to create a file preservation list.
6.4.9.3.9. System Details � GPG and SSL —
From this sub-tab, select the GPG keys and/or SSL certificates to be imported to the kickstarted
system during the %post section of the kickstart. For Satellite customers, this list includes the SSL
Certificate used during the installation of the Satellite.
Note
Any GPG key you wish to import to the kickstarted system must be in ASCII rather than
binary format.
6.4.9.3.10. System Details � Troubleshooting —
From this sub-tab, you can change information that may help with troubleshooting hardware problems:
Bootloader
For some headless systems, it is better to select the non-graphic LILO bootloader.
Kernel Parameters
Enter kernel parameters here that may help to narrow down the source of hardware issues.