Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES Reference Manual Download Page 50

Page: 50 / 268

Chapter 4. Red Hat Network Alert Notification Tool

Figure 4.2. HTTP Proxy Configuration

If your network connection requires you to use an HTTP Proxy Server to make HTTP connections,
on the

Proxy Configuration

screen, type your proxy server in the text field with the format

HOST:PORT. For example, to use the proxy server http://squid.mysite.org on port 3128, enter

squid.mysite.org:3128

in the text field. Additionally, if your proxy server requires a username

and password, select the

Use Authentication

option and enter your username and password in the

respective text fields.

Tip

To run the configuration wizard again, right-click on the applet, and select

Configuration

Your preferences are written to the

.rhn-applet.conf

file in your home directory. The

Red Hat

Network Alert Notification Tool

also uses the system-wide configuration file

/etc/sysconfig/

rhn/rhn-applet

. The setting for

server_url

should be set to your satellite server. For example:

server_url=http://YourRHN_Satellite.com/APPLET

Or, for SSL:

server_url=https://YourRHN_Satellite.com/APPLET

Summary of Contents for NETWORK SATELLITE 5.1.1 - RELEASE NOTES













































































































































































































































































Search results

Summary of Contents for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Reviews:

Related manuals for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Brands by name

Popular brands

Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES, Reference Manual

Search results

Summary of Contents for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Reviews:

Related manuals for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Brands by name

Popular brands