Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES Reference Manual Download Page 245

Page: 245 / 268

Oracle::Disk Sort Ratio

233

Field

Value

Oracle SID*
Oracle Username*
Oracle Password*
Oracle Port*

1521

Timeout*

Warning Minimum Data Dictionary Hit Ratio
Critical Minimum Data Dictionary Hit Ratio

Table C.53. Oracle::Data Dictionary Cache settings

C.9.7. Oracle::Disk Sort Ratio

The Oracle::Disk Sort Ratio probe monitors an Oracle database instance and collects the following
metric:

• Disk Sort Ratio — The rate of Oracle sorts that were too large to be completed in memory and were

instead sorted using a temporary segment.

Field

Value

Oracle SID*
Oracle Username*
Oracle Password*
Oracle Port*

1521

Timeout*

Critical Maximum Disk Sort Ratio
Warning Maximum Disk Sort Ratio

Table C.54. Oracle::Disk Sort Ratio settings

C.9.8. Oracle::Idle Sessions

The Oracle::Idle Sessions probe monitors an Oracle instance and collects the following metric:

• Idle Sessions — The number of Oracle sessions that are idle, as determined by the required

Time

Idle

value you provide. Only those sessions that have been idle for this duration, which is measured

in seconds, are counted as idle sessions.

Field

Value

Oracle SID*
Oracle Username*
Oracle Password*
Oracle Port*

1521

Time Idle (seconds)*

Timeout*

Critical Maximum Idle Sessions

Summary of Contents for NETWORK SATELLITE 5.1.1 - RELEASE NOTES













































































































































































































































































Search results

Summary of Contents for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Reviews:

Related manuals for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Brands by name

Popular brands

Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES, Reference Manual

Search results

Summary of Contents for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Reviews:

Related manuals for NETWORK SATELLITE 5.1.1 - RELEASE NOTES

Brands by name

Popular brands