Red Hat NETWORK SATELLITE 5.1.1 - RELEASE NOTES, Reference Manual

Page: 175 / 268

Chapter 8.
163
Virtualization
In order to manage and provision your client systems, you must first synchronize content from RHN's
central servers to your Satellite.
RHN recommends that you sync at least the following channels:
• Red Hat Network Tools for RHEL Server (v. 5 for 32-bit x86) — rhn-tools-rhel-i386-server-5
• RHN Tools — rhn-tools-rhel-4-as-i386
• Red Hat Enterprise Linux Server (v. 5 for 32-bit x86) — rhel-i386-server-5 (and all child channels)
• Red Hat Enterprise Linux Server Virtualization (v. 5 for 32-bit x86) — rhel-i386-server-vt-5 (and all
child channels)
8.1. Setting Up the Host System for Your Virtual Systems
Before creating guest systems, you must first prepare your host system. To do this, create a Red Hat
Enterprise Linux 5 Server kickstart profile, then use that kickstart profile to install the operating system
on your host. Once these steps are complete, you can proceed to provision virtual guests.
8.1.1. Create a Kickstart Profile for the Guest Systems
1. Login to the Satellite's web interface. Navigate to the
Kickstart Overview
screen by clicking the
Manage Kickstarts
link in the
Tasks
widget in
Your RHN
, or by clicking on the
Systems
tab,
followed by the
Kickstart
subtab in the left navigation bar.
2. On the
Kickstart Overview
page, click the
Create a New Kickstart Profile
link in the
Kickstart
Actions
widget in the upper right corner.
3. You should now find yourself on Step 1 of the kickstart profile creation process:
a. Enter a label for your profile that will enable you to distinguish it from your other profiles. For the
remaining instructions, we'll assume the label is
host-system-for-virtual-guests
.
b. For the
Base Channel
field, select Red Hat Enterprise Linux (v.5 for $ARCH) (where $ARCH is
the architecture of your host system.
Note
You may install 32-bit Red Hat Enterprise Linux 5 on a 64-bit host system. If you
choose to do this, however, please be aware that your guest systems must also
run the 32-bit version of Red Hat Enterprise Linux.
c. In the
Kickstartable Tree
field, select
ks-rhel-$ARCH-server-5
where $ARCH is the
architecture of your host system.
d. Please select
Para-Virtualized Host
for the
Virtualization Type
field.