Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT, Reference Manual

Page: 166 / 300

5. The next page displays a list of all systems with Monitoring entitlements. Check the box to
the left of the system(s) to which you wish to apply the Probe Suite, select the monitoring
scout you wish to use, and click the Add systems to probe suite button to complete the
creation of the Probe Suite.
You can either delete or detach probes from the suite. Detaching a probe disassociates the
probes from the suite and converts them to system-specific probes for the specified system.
This means that changes to the detached probes only effect that system. Deleting a probe
removes it from the Suite for all systems.
To remove probes from the Probe Suite:
1. From the Monitoring # Probe Suites page, click on the title of the Probe Suite you wish to
alter.
2. Select the Probes sub-tab.
3. Check the box next to the probe you wish to remove.
4. Click the Delete probes from Probe Suites button.
You may also remove a system from the Probe Suite. There are two ways to accomplish this.
The first method is to detach the system from the Probe Suite. When you do so, the system still
has the same probes assigned to it. However, you now have the ability to configure these
probes individually without affecting any other systems. For more information about removing
probes from an individual system, refer to Section 4.2.9.5.2, “System Details # Monitoring —
” .
To detach a system from the suite:
1. From the Monitoring # Probe Suites page, click on the title of the Probe Suite you wish to
alter.
2. Select the Systems sub-tab.
3. Check the box next to the system(s) you wish to remove from the Probe Suite.
4. Click the Detach System(s) from Probe Suite button
The second method is to remove the system from the suite. This removes the system from the
suite and deletes all running probes from the system.
Note
Chapter 6. Red Hat Network Website
152