Chapter 2.
Red Hat Network Registration Client
Before you begin using Red Hat Network, you need to create a username, password, and System
Profile. The
Red Hat Network Registration Client
walks you through this process.
2.1. Configuring the Red Hat Network Registration Client
Warning
Most users do not need to configure the
Red Hat Network Registration Client
before registering
their systems. Do not attempt to use this option unless you must.
To start the graphical interface for configuring the application to connect through an HTTP proxy
server, type the following command at a shell prompt:
rhn_register --configure
The window shown in Figure 2-1 will appear.
Figure 2-1. Red Hat Network Registration Client Configuration
To start the command line version, use the command:
rhn_register --nox --configure
It has more configuration options than the graphical version.
You will be presented with a list of options and their current values:
0.
enableProxyAuth
No
Summary of Contents for NETWORK BASIC - USER REFERENCE GUIDE 3.3
