Red Epic EPIC-M, Operation Manual

Page: 70 / 253

955-0002_v3.3, Rev-B
COPYRIGHT © 2012 RED.cm, Inc.
69 69
MENU CONTROLS
Displayed in the Upper Display Group of the VIEWFINDER output(s), are FRAMERATE (FPS),
EXPOSURE (ISO), _._ (F/Stop), WHITE BALANCE, RESOLUTION, and QUALITY (REDCODE). These
parameters are adjustable directly through this screen. When using the touchscreen, directly to the right
of these parameters is the MENU icon
which when pressed will take you to the secondary camera
set up menus.
ADJUSTMENTS
BASIC SETTING ADJUSTMENTS
SIDE HANDLE / REDMOTE
• The MENU button can be used to ENTER the secondary menus, as well as CANCEL inside lists and
for navigating back up menus.
•
Navigate to the desired setting using the NAVIGATION GROUP direction keys and press ENTER.
•
Use the Scroll Wheel or Adjustment Ring to increase or decrease the parameter value.
•
When the desired value has been selected, press ENTER to set.
BASIC ADJUSTMENTS USING SIDE HANDLE ONLY
Although not recommended, the Side Handle can be used stand alone to make basic adjustments to
FPS, ISO, Shutter Speed, Resolution and REDCODE located on the Main Menu screen. Use the
Navigation Group to make these adjustments while watching the cursor placement under the desired
setting on the side handle LCD. When desired setting is selected, press the Enter button to access, then
use the Scroll Wheel, Directional Pad or Adjustment Ring to make changes. When done, press the Enter
button again to set the changed parameter. The MENU button can be used to ENTER the secondary
menus, as well as CANCEL inside lists and for navigating back up menus.
TOUCHSCREEN
•
The MENU ICON can be used to ENTER the secondary menus, as well as CANCEL inside lists and
for navigating back up menus.
• Touch the desired parameter for adjustment.
•
Slide your finger across the screen to scroll through the available parameter values.
•
When desired the parameter value has been selected, touch anywhere in the screen area to set.