10
DesIGn FeaTUres
• Multiple process DC output range:
5 - 425 Amps
• Thermostatically protected
with Thermal Light.
• Simple and Easy to Use
•
Flexible Multi-Process Capability
– Including stick, TIG, MIG,
Flux-cored and CAG.
• Bright Digital Amp and Volt Meters
– Easy to monitor, even in
sunlight, and presettable for precise procedure control,
display error codes for troubleshooting
• Compact, Durable Case
– Tough IP23 enclosure rating
ensures the ability to withstand extreme field environments.
• Variable Hot Start
– Get the extra starting amperage you need
for thick, rusty or dirty material.
• Variable Arc Control
– In stick mode, vary the arc force to
obtain the “soft” or “crisp” arc you want as conditions
require. In CV modes vary the pinch or inductance to control
spatter, fluidity and bead appearance.
• Full-Featured Remote Control Capability –
Use a foot pedal or
hand control to remotely vary output up to 100 ft. (30.5 mm)
away.
• 380 – 575 VAC, 50/60Hz Voltage Input
– Offers the ability to
be connected anywhere in the world.
• Voltage Compensation and Reliable Input Voltage
Connection
– Provides consistent operation over ±10% input
voltage variation.
• Easy to Parallel Machines
in CC mode.
• Severe Duty –
Can be stored outdoors. IP23 Rated.
• Desert Duty Rated –
Welding outputs are rated for extreme
temperature operation up to 55°C - welding output is reduced
@ 55°C.
• VRD
– reduces OCV in CC modes when not welding for added
safety.
• Low Operating Cost
– Operates at a high efficiency
• Transport -
Reversible handles for ease of lifting.
• CrossLink™ technology
allows for remote control of the
welding output using the weld cables rather than a control
cable when connected to a CrossLink™ compatible wire
feeder.
GENERAL DESCRIPTION
FX360XL
