background image

CAUTION!

 

The O-ring is an essential part of waterproofing for this housing. Not properly greasing the 

O-ring as directed may cause the O-ring to twist in the O-ring groove, possibly causing 

water leakage.

 

Always perform the above O-ring, O-ring groove and O-ring Contact Surface maintenance 

and greasing every time you open/close the housing.

 

Please pay close attention and make sure the O-rings are not twisted or bulging, free of  

any contaminants (dirt, hair, etc.), and that foreign objects do not obstruct proper closing 

of the housing Back Cover.

 

DO NOT clean the housing with volatile organic solvents or chemical cleaning agents such 

as thinner, gasoline, and benzine, etc.

 

Housing Back Cover is manufactured using hard coat acrylic. When cleaning use a clean 

soft cloth taking care not to scratch it.

INSURANCE INFORMATION

 

Seatool/Recsea strongly recommends insuring your camera. For more information please 

contact your dealer.

CONSUMABLE PARTS

For   replacement   of   consumable   parts   such   as   O-ring   please   contact   your   dealer   or 

Seatool/Recsea.

SPECIFICATIONS

Compatible Camera

OLYMPUS Tough TG-3 and TG-4

Maximum Depth

130 meters (426 feet)

Material

Housing: Corrosion-resistant aluminum alloy, anodized

Lens, Flash Window:         Hard Coat Acrylic

Levers, Dials Buttons:  

               

POM, PC

Screws, Springs, Shafts:   Stainless Steel, Galvanized

Dimensions 

Weight                       

W150mm x D65.5mm x H99mm

752g (Land) / 370g (Freshwater w/Camera)

Accessories

M67 Bayonet Adapter, Strobe Mask-External Strobe 

Connection Mount (Fiber-Optic/SEA&SEA) and Screw, 

Wrist Strap, Reserve O-ring, O-ring Removal Pick, O-ring 

Grease

OPTIONS

The following items are optional. Please contact Seatool/Recsea or your local dealer if you 

wish to purchase.

ST Bayonet Mount Adapter AD-ST-TG3

M52 Bayonet Mount Adapter AD-M52-TG3

28AD Bayonet Mount Adapter AD-28AD-TG3

28LD Bayonet Mount Adapter AD-28LD-TG3

Close-Up 50mm Lens SAL-01-M67 

Close-Up 50mm Lens SAL-01-M52

ST Close-Up 50mm Lens x2 SAL-02-ST

ST Close-Up 50mm Lens x3 SAL-03-ST

Close-Up Lens x2 SAL-02-TG3 (Bayonet Type)

Close-Up Lens x3 SAL-03-TG3 (Bayonet Type)

6.

Summary of Contents for WHOM-TF3/4











Reviews: