※
Please refer to camera manual for explanation of camera controls.
OPENING AND CLOSING THE BACK COVER
※
Please do the following operations in a clean area with low humidity and dust.
Open & Close Dial Locks in two places, in the open position and in the closed position.
1. To open, while pressing the Open & Close Lock Button, turn the Open & Close Dial Lever
to the right (clockwise).
2. The back cover will open once the dial is turn completely and lever is upward position.
3. Carefully remove Back Cover by pulling it free from the Lip-hinge Groove on main body.
4. To close, place the Back Cover Lip-hinge into the Lip-hinge Groove on the main body, seat
Back Cover into place and press firmly (Note: Dial will turn to the left (counterclockwise).
While pressing the Open & Close Lock Button, Using the Open & Close Dial Lever turn
the dial completely to the left making sure the Open & Close Lock Button is engaged with
an audible “click”.
※
NOTE:
Firmly press Lock Button while turning dial. Failing to do so may cause damage to
locking mechanisms.
INSTALLING CAMERA
CAUTION!
Before using, please be sure the test the housing (without camera) in a bucket of
freshwater. After use in salt water, rinse thoroughly in a bucket of fresh water without fail,
pressing all buttons several times to flush out salt deposits and other contaminants. Allowing
saltwater and contaminants to dry on housing can damage functions and O-ring. Clean with
fresh water only, using a soft, dry cloth to wipe away water.
3.
Summary of Contents for WHOM-TF3/4
Page 10: ...MEMO ...
