HANDLING PRECAUTIONS
CAUTION!
Housing Monitor Window, Flash Window, and the lenese of some optional Lens
Ports are manufactured using hard coat acrylic. When cleaning use a clean soft cloth taking
care not to scratch them.
INTERNAL AND EXTERNAL STROBE
※
The Accessory Shoe on top of the housing can be used for installation of a target light.
Please be mindful of the weight of the light(s) you intend to use. For heavy lights and
strobes please use Seatool/Recsea genuine tray and grip assemblies.
CAUTION! Damage is irreparable.
※
Please refrain from using lights attached to the Accessory Shoe as a carrying handle.
※
For heavy strobes and lights please use optional Grip & Tray Assembly and compatible
connector.
※
While in the housing, the camera's flash unit can be deployed using the housing Flash
Flash Open & Close Lever. Be sure to manually close the flash unit prior to removing back
cover from housing.
※
Use the Strobe Mask/External Strobe Connection Mount to connect external strobe plugs
or fiber-optic cables.
Connecting fiber optic cable for external strobe use:
CAUTION!
When not in use store Strobe Mask/External Strobe Connection Mount and
Screws x 2 in a secure place so as not to lose them.
1. Using the two white screw provided attach the Strobe Mask/External Strobe Connection
Mount the to the Flash Window. If desired the Diffuser can be removed as mentioned on
page 2.
2. The Strobe Mask/External Strobe Connection Mount is equipped with a two (2) plug
sockets adapter. Remove adapter to for access to the fiber-optic sockets as shown
below.
3. Insert plugs (SEA&SEA) or fiber-optic cable (INON) or plug (SEA&SEA) into sockets
provided.
※
Three (3) sockets are provided at the bottom of the housing for use in attaching grip
assemblies.
7.
