Recovery Pump RP Lite Model 760R, User Manual

Page: 29 / 42

Step 5: Set Massage Pressure and Time
a. Press and hold the Pressure Knob while setting the pressure to the desired
pressure. Once setting the pressure, the Pressure Knob is locked.
b. Press the Time button to set massage time.
Guidelines for Selecting Pressure
Changing the pressure level alters the massage intensity of the by increasing
the amount of air inflating each air chamber.
Lower pressure setting applies lighter massage, and higher-pressure setting
applies more intense massage (see Table 2 as a guide for pressure
selection).
If the massage is too intense, decrease the pressure.
Table 2 - Pressure Selection for Arm, Leg, and Mini Boot Garments
Step 6: Select Hold Time
At the end of each inflation cycle, the console holds the air pressure for a few
seconds before releasing the air, pausing, and then continuing to the next cycle
(the
Hold Time ).
You can set the duration of the Hold Time for your comfort and to alter the
massage pace (see Table 3).
Table 3 - Setting Hold Time
Note:
•
The minimum pressure setting is 20 mmHg.
The maximum pressure setting is 100 mmHg.
•
The minimum massage time setting is 15 minutes.
The maximum massage time setting is 60 minutes.
•
Setting the massage time to con continues the massage until the
Start/Stop button is pressed or the Power Switch is turned off.
Massage Intensity
Pressure Setting (mmHg)
Light 20–30
Medium 40–60
Intense 70–100
Hold Time Action Alarm Beeps
Short Press and hold the Time button for 3 seconds. One beep
Medium
Press and hold the Time button for 3 more seconds.
Two beeps
Long
Press and hold the Time button for 3 more seconds.
Three beeps
L98107R0-G 25