Recovery Pump RP Lite Model 760R, User Manual

Page: 21 / 42

a. Place the console on a flat stable surface from where it will not slip or fall
.
Make sure the front of the console is at least six inches from the edge of the
surface.
b. Position the console so that you can easily reach the controls during
massage.
c. Select the plug suitable for your country and insert it onto the pins on the
DC power adapter backside (see figure below).
To replace the plug, press and hold the Open button under the plug while
pulling out the plug (see figures below).
d. Insert the DC power adapter cable into the DC adapter socket on the
console, and then insert the DC adapter into an appropriate 100240 Volt wall
outlet.
Caution:
When the system has been stored in extreme temperature conditions
of 20°C (-4°F) or 70°C (158°F) between uses, wait for two (2) hours
before using the system.
L98107R0-G 17