5
Operation
20 / 30
BAL_PROTECT_RC2_RC3_EN_1V0_BLA_121-006454704
– From continuously open - to another operating mode
– From Locked - to another operating mode
– From one-way - to another operating mode
NOTICE
After a faulty self-test, the door opens and remains in the open position. An alarm is triggered and
displayed on the control unit. In this case, the service center must be notified.
5.6.2
Resetting the alarm
An alarm can be activated for the following reasons:
– An error occurring during the self-test or during normal operating
– A hindrance during the opening movement
An alarm can be reset as follows:
– By pressing the E-key on the BDE-D (press key longer than 5 seconds)
– By pressing the emergency stop switch (option)
