Original Instruction Manual |
WG250
Wet Stone Sharpening System | Version 3.0 | November 2012
30
10.9.
WG250/I
Tool Rest Jig
Getting to Know the Tool Rest Jig
The tool rest jig mounts on to the support arm of your wet
stone sharpener.
A.
Lock knob
A
Using the Tool Rest Jig
1. Mount the support arm in either the lower or upper
(pictured) position.
2. Slide the tool rest jig on to the support arm and fix in
place with the lock knob.
3. Different angles can be achieved by rasing or lowering
the support arm.
4. Rest your tool on the jig and move the blade slowly back
and forth across the Sharpening Stone when in motion.
5. To finish hone your blade on the leather honing wheel,
see page 11.
6. The tool rest jig can be mounted on the support arm with
either the short or long edge facing the stone to achieve
different angles.
A
Use to sharpen:
• Scrapers
• Screw drivers
• Cabinet scrapers
• Hollowing tools
• Spoke shave blades
Summary of Contents for WG250
Page 37: ...37 14 Parts Lists Diagrams ...
