Recognition Systems HandPunch 1000, Manual

Page: 41 / 70

HandPunch 1000 Manual
Page 39
Enrollment Menu
Enrollment is the process of recording a hand image and associating it with an
ID number. The first person to enroll in the HandPunch has access to all
command menus. This person should enroll using the Add Supervisor
command (see page 42). Once a supervisor has been enrolled, all further
enrollments use the following rules:
• A user enrolled through the Add Employee command (page 42) is assigned
Authority Level 0. This allows the user to punch in and/or gain access
through a door secured by the HandPunch.
• A user enrolled through the Add Supervisor command (see page 42) is
assigned Authority Level 5. This allows the supervisor to punch in and gain
access through a door secured by the HandPunch, and it allows the
supervisor to access all command menus.
Until a user has been assigned to Authority Level 5 using the Add Supervisor
command, every user with Authority Level 0 can access every menu. This is
done to ensure that the first person enrolled is able to access all the menus to
perform all the programming required to support the HandPunch. Once a user
has been enrolled using the Add Supervisor command, all further user authority
levels are assigned as per the list above. This protects the integrity of the system
by enacting the Authority Level rules described above. Recognition Systems
strongly recommends enrolling at least two users as supervisors to ensure that
more than one person has the authority to access all menus and all commands.
Advance planning and training make enrollment fast and easy. Users should be
informed on what to expect and how to place their hands on the HandPunch
before you enroll them.
Navigating the
Setup Com-
mand Menu Enter the appropriate password to enter the Setup command menu. Once you
have entered the command menu, there are three options available for
navigating the command menu system.
• Press to enter the command shown on the display.
• Press to step to the next command in the menu.
• Press to exit the command menu (pressing any numeric key
also exits the command menu). If you are in a command’s sub-menu, press
multiple times to completely exit the command menu.
NOTE
#
*
CLEAR
CLEAR