Beijing Reci Laser Technology Co., Ltd
User Guide for FSC1000, FSC1500
27
4.6
Local AD Mode
4.6.1
Settings and Connections
Figure 4.8 the connection for local AD model
(1)
Set the AD mode with the control software.
(2)
The 24V Laser enable signal is connected to pins 5 and 6 of the rear panel
16PIN CTRL_INTERFACE.
(3)
The 24V modulated signal is connected to pins 12 and 13 in the rear panel 16
PIN CTRL_INTERFACE.
(4)
0~10V analog signal to the rear panel 2 PIN analog interface.
4.6.2
Sequence of operations
(1)
Turn the front panel key switch to the ON side.
(2)
Turn on the power switch at Rear panel of device. Wait for 30S to initialize
the device (It can also be closed and opened, controlled by an external
switch)
(3)
Press the POWER button on the front panel, the laser power module is
powered up and the red light indicator is turned on.
