Beijing Reci Laser Technology Co., Ltd
User Guide for FSC1000, FSC1500
18
3.4
Installation precautions
(1)
The laser need to be placed horizontally and fixed, without inversion, side
setting, vibration and impact.
(2)
Ensure the power supply wire and the control wire with 16 pin connected
without the electrical power is disconnected.
(3)
When the laser is connected to the water cooler, recognize the water inlet and
outlet signs and step after it;
(4)
During the installation of QBH, the surrounding environment must be
cleaned, in order to protect the QBH from polluted
(5)
Check the output head and clean it if necessary. If any dust on the QBH end
face cannot be cleaned, please contact Reci, and at the same time the cleaning
procedure must be performed by personnel of Reci or authorized by Reci.
(6)
Prevent the delivery cable from treading, excessive bending, smashing with
heavy objects during installation. There would be no warranty if the cable is
damaged due to external force.
CAUTION:
(1)Please make sure the laser optical output and the processing
head are all dust-free before connecting them together.
(2)Please take good care of the black protective cap of QBH
from being polluted; otherwise, it will cause indirect pollution to
QBH output head when the protective cap is put on.
(7)
After the installation or connection of the cooling system, optical system,
electrical wires, remember to do a recheck: make sure the connection of the