30
Description of activities
Select the program number for a chosen day of the week. The user can choose from three default presets and
edit two programs. The black bar indicates the time to
maintain the desired temperature in the HW dispenser -
the HW pump and the circulating pump are operating.
In the remaining time (blank space) - inactive function
(the HW pump and the circulating pump are not
operating).
-change the program number with the knob
- change the day of the week, press the
knob
The return button exits the function.
One of two daily user programs. This program can be used on any day of the week during the weekly HW
program. The regulator allows determining the time in which the HW will be heated to an accuracy of up to 30
minutes. Any number of time periods per day can be set. This can be useful if the HW circulating pump is
installed.
Programming consists in setting the cursor in an appropriate place on the timeline (turn the knob), pressing the
knob to activate the area selection mode to choose the area during which the HW will be heated and moving
the cursor (turn the knob). The area selection mode will be deactivated after pressing the knob again and
deleting the previously selected heating area.
Note: It should be noted that the HW circulating pump, which is to provide hot water immediately after pressing
the tap, also cools water. The regulator activates the pump according to the settings input by the Service, but
only when the HW heating program is set. Therefore, the time can be precisely set when hot-water is used
which allows minimizing loss of fuel.
Description of activities
The black bar and the
icon mean the heating is ON - the HW pump and the circulating pump are operating.
In the remaining time (blank space) - disabled
function, the HW pump and the circulating pump
are not working, decreased temperature is
maintained.
-change the time interval with the knob
- turn on the heating by pressing
the knob
The return button exits the function.
Program no. 4
