REBOTEC /
BA-Nr.: 02.07.142/2021-12-A01
- 8 -
EN
11.5 Removing the footrests
•
Remove or fold up the seat. Then, raise the foot-
rest by approx. 100 mm and turn outwards by 90
degrees.
•
Now you can push the footrest all the way up and
pull it out
11.6 Handling of the toilet bucket
•
From the back of the chair, slide the toilet bucket
under the seat. To remove, slightly lift the bucket
and then pull it out backwards.
•
In the version with a 2-section toilet seat, you can
alternatively insert or remove the toilet bucket from
above by lifting the seat.
11.7 Removing the backrest cushion
•
For cleaning purposes or for
replacement
the
backrest
cushion can be removed from
the arresting grid at the
backrest of the chair by press-
ing against it with your hand
from the back.
12 Troubleshooting
Fault
Potential cause
Remedy
Armrest can-
not be swiv-
elled down
Deposits in the
locking device
(locking bolt)
Cleaning,
checking
regularly
Locking bolt
cannot be
pulled out
Deposits, tension
spring jammed or
defective
Cleaning,
Replace
the locking
bolt
Footrest can-
not be folded
down
Deposits in the
joint,
Bracing
Cleaning,
Check
screw con-
nection
Wheel lock
does not brake
General defect
see mainte-
nance!
Turning the
wheel is stiff
Deposits
Cleaning
Wheel does
not turn
General defect
see mainte-
nance!
Fault
Potential cause
Remedy
Uneven run-
ning of the
wheel
Severe uneven
tread wear
see mainte-
nance!
Chair frame
too unstable
Screw connections
too loose
Screw con-
nections:
Tighten
frame,
wheel in-
serts
Wheel insert
bent/distorted
Hitting an obstacle
see mainte-
nance!
13 Care and maintenance
13.1 Cleaning and care
The product can be cleaned using a mild
conventional cleaning and disinfecting
agent. After cleaning, wipe the product with a clean,
moist cloth and then wipe it dry with a dry cloth.
•
Do not use scouring agents or cleaning agents
with aggressive ingredients (acids, thinners), as
well as hard cleaning objects (brushes), as other-
wise the surfaces may be damaged or deposits
may form on the materials.
Keep the product clean and clean it regu-
larly. Special attention must be paid to hy-
giene in the sensitive areas.
•
The product is suitable for manual cleaning and
disinfection. Please observe the reprocessing in-
structions (02.12.156).
13.2 Maintenance
•
Wear and tear that is not recognised in time and/or
improper handling, as well as irregular or no
maintenance may result in accidents.
For safety reasons, the product must be pro-
fessionally maintained at least once a year.
•
Check product for visible damage
(Cracks, breakage, loose parts)
•
Check stability before use
Maintenance/inspection scope
•
Maintenance should include the following in-
spection work and should be documented.
•
All bolted connections for tightness (espe-
cially the wheel inserts and the frame)
•
Function of the armrests and locking bolts
•
Function of the footrest (replace defective
footrests)
•
Running characteristics and tread of the
wheels (replace defective wheels)
2
1
