REBOTEC /
BA-Nr.: 02.07.142/2021-12-A01
- 5 -
EN
•
Patients who are prone to uncontrolled actions or
movements must be supervised when using the
chair.
•
The chair must
only
be moved on a slope or incline
with the help of a caregiver. Generally, on an uphill
slope the chair should be pushed forward and on
a downhill slope it should be pulled backward.
Caution: Danger of breakage!
•
The product is only suitable for the intended use.
Observe the permitted user weight.
•
Never carry or lift the product while a patient is sit-
ting on it.
•
Do not pull or hold on to additionally attached com-
ponents or accessories.
Caution: Danger of tipping over!
•
The chair must only be pushed by the push handle
(backrest).
•
Only
move the chair at a moderate walking pace
(with and without patients).
•
Do not lean out of the chair (both in standstill and
while moving). If the swivel castors are in an unfa-
vourable position (pointing inwards), stability of the
chair is limited.
Caution: Danger of pinching or catching!
•
When folding the armrests up or down, do not
reach into the joint guide so that no parts of the
body or other objects are trapped. To this end, also
see 9 on page 6.
•
When attaching the seat plate, do not reach be-
tween the seat surface and the seat frame so that
no body parts are trapped.
•
When pulling out and pushing in the toilet bucket,
there is a risk of trapping soft tissue of the patient.
To prevent injuries, the bucket may only be pulled
out or pushed in when no user is sitting in the chair.
Caution: Risk of injury!
•
There is a risk of injury with surface temperatures
> 40°C. Therefore, do not expose the product to
high temperatures (e.g. sunlight, radiators, hot wa-
ter). Allow the product to cool down before use.
If the product is used by patients with in-
sensitive skin (no temperature perception
or skin damage), a heat check (e.g. touching with
the back of the hand) must be carried out by the
nursing staff.
5 Incident reporting
•
Serious incidents in connection with the product
must be reported immediately to the manufacturer
and BfArM.
BfArM:
▪
Use the reporting functions and provided
forms.
Manufacturer:
6 Warranty
•
For this product the manufacturer grants a war-
ranty of 12 months. Compliance with the general
terms and conditions(
), as
well as the intended use, are a basic prerequisite.
The statutory warranty provisions shall apply.
•
Unauthorised modifications to this product will void
the product’s conformity and the warranty.
6.1 Complaint
•
Please contact us before returning the product.
•
To reduce transport damage, use the original
packaging if possible.
•
The Infection Protection Act must be complied
with.
Please make sure that the product does not
pose a risk of infection when returned.
Enclose the information sheet on safety with the
product.
Costs may incur for returns that are not marked
non-objectionable.
7 Reuse, lifetime
•
The product is suitable for reuse. How often the
product can be reused depends on the frequency
and nature of use.
•
Before reuse, the product must be reprocessed hy-
gienically and the technical and functional safety
and reliability of the product must be checked and
restored if necessary.
For more detailed information, please see the
reprocessing instructions (02.12.156) and the
maintenance instructions (02.11.150).
The documents can be downloaded from the fol-
lowing link.
▪
•
If the product is used as intended, its lifetime is 5
years. The effective lifetime may vary depending
