12
13
EN
EN
INSTALLATION & OPERATION
The product adopts light and movement sensors. Automatically turns light on when
motion is detected (provided the light intensity is not strong enough).
When the movement is no longer present the light is turned off after preset delay
time (15-160 s).
In relation to device’s voltage, make sure to follow safety precautions during
mounting:
1. Switch the light off.
2. Insert the motion sensor light bulb socket into any existing ceiling
bulb socket; then insert a light bulb into the motion sensor light
bulb socket.
3. Switch the light on.
4. The device enters normal work mode after about 40 seconds. After
first installation the lamp may light on and off several times during
those 40 seconds (this is normal phenomena).
5. The lamp will automatically turn the light on whenever motion is
detected (if the light intensity is not strong enough).
6. When the movement is no longer present, the light will be
automatically switched off after previously preset delay time (15-160
seconds).
7. Suitable installation height from floor: 2,5-3 m.
Adjustment knobs
- 10 LUX light
- daylight
Working brightness adjustment button: turn anticlockwise to
make the lamp work in weak ambient light.
Time delay adjustment button: turn to adjust switch off delay
time (15-60 seconds)
Detection sensitivity adjustment button: turn clockwise to
strengthen the sensor sensitivity and expand the detection
distance range.
Specifications
• Light and motion sensor
• Adjustable time delay: 15-160 seconds
• Adjustable ambient brightness: ≤10 Lux – daylight
• Adjustable sensor sensitivity
• Detection zone: up to about 5 m range, about 360°
• Maximum power for: LED light bulb: 22 W
fluorescent lamp: 20 W
• Voltage: 220-240 V; 50/60 Hz
