Rebel TOOLS RB-5003, User Manual

Page: 44 / 164

• The side of the hedge are trimmed using curved shaped movements
from the bottom and upwards. The blade should not be forced to cut
too deep. Cut lightly through the surface of the hedge.
• When trimming the top of the hedge, trim away from you but do not
overreach. It is much wiser and safer to move along and cut within
your reach remaining on two feet at all times. Do not let the blade
come into contact with the wire meshing or fencing material.
MAINTENANCE
Before cleaning and maintenance of the device, turn it off, and
take out the lock key.
Clean the casing regularly with a soft cloth, preferably after each use.
Make sure that the ventilation openings are free of dust and dirt.
Remove very persistent dirt using a soft cloth moistened with
soapsuds. Do not use any solvents such as gasoline, alcohol,
ammonia, etc. Chemicals such as these will damage the synthetic
components.
Clean the power tool before storing. Store the power tool, user manual
and accessories in the original packaging. Store the product in a clean,
dry place protected from moist and keep it out of the reach of children.
Do not store the power tool in temperatures below 0°C. Do not place or
store any object on the top of the power tool.
Special condition for battery transport
The lithium-ion batteries contained in the power tool are subject to the
dangerous goods requirements. When preparing the tool to be shipped,
it is mandatory to consult a specialist in hazardous materials. Also
observe any national/local regulations which is likely to be more detailed.
Tape terminals or mask them and pack the battery so that it does not
move in the package.
The product and the user manual are subject to change. Specifications
can be changed without further notice.
44
EN