background image

9

Reverse With Confidence

Warranty

One Year Warranty

Rear View Safety, Inc. warrants this product against material defects for a

period of one year from date of purchase. We reserve the right to repair or

replace any such defective unit at our sole discretion. Rear View Safety, Inc.

is not responsible for a defect in the system as a result of misuse, improper

installation, damage or mishandling of the electronic components. Rear View

Safety, Inc. is not responsible for consequential damages of any kind.

This warranty is void if: defects in materials or workmanship or damages re-

sult from repairs or alterations which have been made or attempted by oth-

ers or the unauthorized use of nonconforming parts; the damage is due to

normal wear and tear, this damage is due to abuse, improper maintenance,

neglect or accident; or the damage is due to use of the Rear View Safety,

Inc. system after partial failure or use with improper accessories.

Warranty Performance

DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR REAR VIEW SAFETY

PRODUCT EXHIBIT A DEFECT IN MATERIAL OR WORKMANSHIP, SUCH DEFECT

WILL BE REPAIRED WHEN THE COMPLETE REAR VIEW SAFETY, INC. PRODUCT

IS RETURNED, POSTAGE PREPAID AND INSURED, TO REAR VIEW SAFETY, INC.

OTHER THAN THE POSTAGE AND INSURANCE REQUIREMENT, NO CHARGE

WILL BE MADE FOR REPAIRS COVERED BY THIS WARRANTY.

Warranty Disclaimers

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE

ABOVE WARRANTY IS MADE WITH REGARD TO THIS REAR VIEW SAFETY, INC.

REAR VIEW SAFETY, INC. DISCLAIMS ANY IMPLIED WARRANTY OR MERCHANT-

ABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE AND ALL OTHER

WARRANTIES IN NO EVENT SHALL REAR VIEW SAFETY. INC. LIABLE FOR ANY

INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OR FOR ANY

COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A

CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PROD-

UCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.

Summary of Contents for RVS-5350-W













Reviews: