5
Reverse With Confidence
™
Installation Instructions
Tools Needed
Small flat-tip Screwdriver
#2 Phillips Screwdriver
Tape Measure
Black Electrical Tape
Masking Tape
Multimeter
Pliers
Pencil/Marker
Testing the system:
After installing the system, test the sensors.
Warning:
Do not stand behind a moving vehicle death or injury could occur. Prior to testing, set the
parking brake on, ignition key on (do not start), step foot on brake and shift the vehicle into
reverse. Ensure that the engine is not running while proceeding with the following tests:
Test the system operation with a large object (piece of wood (60*30*1cm) or other
object (not too small). Start with the object more than 1m away from the vehicle.
Then move the object closer the vehicle and ensure that the buzzer, LED, and distance
indicators display correctly.
Summary of Contents for RVS-5350-W
Page 1: ...1 TM ...
Page 11: ...11 Reverse With Confidence ...