3
Installation Instructions
Reverse With Confidence
™
Red to back light +12
Red to back light +12
Black to GND
Black to GND
5.4 Installation Instructions:
Monitor:
- Attach the monitor to the dash with the 3M
sticker.
- Connect the wireless transmitter to the YELLOW
RCA input labeled AV2 and connect the power wires
on both the monitor and the transmitter to a 12V
power source.
Camera:
- Use a screwdriver to remove the screws of the
licence plate. Line up the screw holes on the camera
with the holes on the license plate and attach the
camera using the license plate screws.
- Plug the anti-dismounting cap into the screw
hole.
Wireless receiver Wireless transmitter
Summary of Contents for RVS-5350-W
Page 1: ...1 TM ...
Page 11: ...11 Reverse With Confidence ...
