REAR VIEW SAFETY
4
Installation Instructions
- Connect the 4 pin connection on the camera to the 4 pin connection on the camera wiring
harness.
- Attach the wireless transmitter to the YELLOW RCA port labeled AV-OUT.
- Connect both the camera and the transmitter to a 12V power source from the reverse lights.
NOTE:
When connecting the power wires, connect the RED to power and the BLACK to ground.
3. Align the host bracket screw groove and the
plate screw holes, Locking screw.
4. Plug the anti dismounting cap into the screw
hole. Connect the cable.
5.5 Display Installation
Monitor
Rearview mirror monitor
Red to back light +12
Red to back light +12
Black to GND
Black to GND
Wireless receiver Wireless transmitter
Summary of Contents for RVS-5350-W
Page 1: ...1 TM ...
Page 11: ...11 Reverse With Confidence ...