Parking Sensor System
ECU
I
Rear
I
ECU
l:._,_,_,:I
Fig.2
- composition of
Reverse
Aid
System
•
HOW TO USE
+
System Startup
:>
Parking Aid System
Wamlng Unlt
1·-·-·-·-·1
TFT Monitor Bult in Rearview
Minor
•
When reverse is engaged, system will be automatically
powered on and beep once, informing you that system is in
diagnostic mode, then both rear and front sensors
start
to work.
•
Once reverse gear is shifted, rear sensors stop working, but
l1J 5
front sensors keep working for 10s.
•
When vehicle runs forward, rear sensors never work, but after
each brake, the front sensors work for 10s, and report the
obstacles only if they are located in the display distance.
:>
Reverse Aid System
When reverse Is engaged, system ls automatically activated and
beep once before diagnostics and detection.
• Diagnostics
:>
How It works
•
When powered on, the system detects its sensors first. If
some sensor Is working
abnormally, the warning
unit will tell you its serial
number.
Serial numbers
of
sensor are
dt!llned as Rg.3
Flg.3
-
Delln�on ol Senoor'11 SertoJ NumborB
•
After 3 seconds of diagnostics and possible fallure warning,
system assumes working mode, although with abnormal sensors,
if any.
Note:
Waming unit
will
never alert you
of
any obstacles behind the abnormal
sensar(s).
:>
Warning Mode of Diagnostics
No matter If any sensor Is found defective or not, system
