When reverse is engaged, the monitor shows not only the image
from camera, but also the distance to and direction
of
obstacle.
Moreover, It also has an audible alarm function. See Fig. 11.
As Fig.11 shows, use MENU button to tune the monitor's
brightness, contrast, colour and volume; Use VIDEO button to
select between the 2 video channels: vldeo-2 for the rearvlew
camera, Video-1 for other visual equipments such as DVD.
Vid90
.
Te
���
bl
�
e
�NU
Control
DOWN
Panel -
VIDE0-112
POWER
Fig.11 - TFT Monitor of TFT Series
In case the monitor Is powered on - When reverse Is engaged,
the monitor automatically shifts to show the infonnation from
the camera (Vldeo-2) and ultrasonic sensors, after reverse, It
Parking Sensor System
returns to show the images from the channel of Video-1.
•
In case the monitor Is powered off - When reverse Is engaged,
the monitor Is automatically activated
ID
show the situation
behind vehicle, and turns off automatically after reverse.
F eatures of rearvlew ml1TOr - Using optical glass with
specially plated layer for antl-g la re function, the mirror serves as
an excellent inside rearview mirror.
·
Direction signal - It tells you by gleaming that the relative
sensor Is detectl ng an obstacle, thus vlsual ly shows the exact
direction of the nearest obstacle, when there are more than one
obstacles.
Indication
of
distance - Refer to Diagram 8.
�srop•
will be
displayed when obstacle enters Blind Zone.
Remark: TFT series has no indication of
warning
zone.
Sound alarm - Refer to Diagram 7 for audible alarm mode.
Sound volume is adjustable with the MENU button.
,. About detection
Incorporating highly sensitive ultrasonic sensors and computer
data fuzzy processing technology, this system feab.Jres minimal
bllnd area and long detection range. However, the detection
result Is the distance from sensor to the wave reflection surface
of an obstacle, so the detected distance and the alarm signals
may descr1be a different picture from the actual situation, since
IJJ12
